Wuhan GDZX Power Equipment Co., Ltd
LONG-TERM PROJECT, QUALITY FIRST.
Add to Cart
ZXET3006 Double Clamp Grounding Resistance Tester not only has the function of traditional auxiliary grounding electrode to measure the grounding resistance, but also has the unique function of non auxiliary grounding electrode measurement, which changes the traditional measurement principle and means of testing the grounding resistance: using the double jaw non-contact measurement technology, there is no need to hit the auxiliary grounding electrode, and there is no need to isolate the grounding body from the load, realizing online measurement. Under the conditions of single point grounding system and strong interference, the measurement method of setting auxiliary grounding electrode can be used for measurement.
Features
1. Double clamp / ground piles measurement method: applied to any place to measure whether multi-point or single point grounding.
2. Strong anti-interference ability: Self-generating high-frequency current can filter 50Hz and 100Hz harmonic interference current, even in the 500KV substation environment, it can accurately measure.
3. Wide measurement range and high resolution: Range from 0.01Ω ~ 200Ω, resolution 0.01Ω, the ground resistance under 0.7Ω also can be accurately measured.
4. Large jaw design: Jaw diameter is 50mm (standard configuration), which meets the case using flat iron / steel wire grounding, special jaw size can be customized.
5. High-capacity data storage It can store 200 sets of measurement datum.
6. Simple operation, single-operator Small size, light weight, explosion-proof carrying case, easy for field measurements.
Technical parameters:
| Measurement range | Double clamp method | 0.01Ω～200Ω |
| Ground piles method | 0.01Ω～200Ω | |
| Error | Double clamp method | ±3%±2 digits |
| Ground piles method | ±2%±2 digits | |
| Minimum resolution | 0.01Ω | |
| Jaw size | Φ50mm | |
| Storage capacity | 200 groups | |
| Temperature | 0℃～+50℃ | |
| Power supply | 8 AA NiMH rechargeable batteries or regular AA batteries | |
| Weight | 0.8KG (battery included) | |
| Dimension | 265×130×65mm3 | |
Technical Indicators
| Measurement range | Double clamp method | 0.01Ω~200Ω |
| Ground piles method | 0.01Ω~200Ω | |
| Error | Double clamp method | ±3%±2 digits |
| Ground piles method | ±2%±2 digits | |
| Minimum resolution | 0.01Ω | |
| Jaw size | Φ50mm | |
| Storage capacity | 200 groups | |
| Temperature | 0ºC~+50ºC | |
| Power supply | 8 AA NiMH rechargeable batteries or regular AA batteries | |
| Weight | 0.8KG (battery included) | |
| Dimension | 265×130×65mm3 | |
Device display
Features
1. Double clamp / ground piles measurement method: Can be applied to any place to measure whether multi-point or single point grounding.
2. Strong anti-interference ability: Self-generating high-frequency current can filter 50Hz and 100Hz harmonic interference current, even in the 500KV substation environment, it can accurately measure.
3. Wide measurement range and high resolution: Range from 0.01Ω ~ 200Ω, resolution 0.01Ω, the ground resistance under 0.7Ω also can be accurately measured.
4. Large jaw design: Jaw diameter is 50mm (standard configuration), which meets the case using flat iron / steel wire grounding, special jaw size can be customized.
5. High-capacity data storage It can store 200 sets of measurement datum.
6. Simple operation, single-operator Small size, light weight, explosion-proof carrying case, is easy for field measurements.
About GDZX
Wuhan GDZX Power Equipment Co.,Ltd. is a manufacturer of power test equipment, integrating design, production and sales, providing complete solutions for high-voltage testing and electrical testing services for various power users.The main products include:AC series resonance test device, high voltage test equipment, transformer test equipment, secondary protection / switch test equipment, cable fault tester, arrester test equipment, power metering equipment, standard source series and so on. There are many kinds of products and complete models.
Shipping and packaging
1.Q: Are you trading company or manufacturer?
A: We are manufacturer.
We have R&D department, OEM& ODM services available.
2.Q: How long is your delivery time?
A: We usually arrange shipment within 5-7 working days after checking the payment. However, for example, the delivery time of the complete set of test devices will be a little longer, which needs to be checked in real time.
3.Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample, but not for free; you need pay charge and the cost of freight.
4.Q: What is your term of payment?
A: Payment<=10000USD, 100% in advance. Payment>=10000USD, 30% T/T in advance, balance before shipment.
5.Q: What is the payment method?
A: We can accept Bank Transfer, T/T, PayPal, Western Union, Money Gram, Cash etc.
6.Q: Will you provide OEM service?
A: OEM & ODM services available
7.Q: How long is the product warranty?
A: 1 year.