
Add to Cart
This device is for measuring internal water cooling generator or laboratory insulation test.
Features
1. 32 bit micro controller, menu operation
2. Large output current (>25mA under 2500V), short circuit current≥25mA
3. safe and reliable with hv generator fully enclosed and with protective resistor inside.
4. strong anti-interference ability, can satisfy EHV substation site operation
5. auto discharge after test and real-time monitor discharge process
6. Measuring insulation resistance, DAR ( R60S/R15S) and PI (R10min/R1min) of water cooled generator
7. testing voltage 2500V/5000V, can measure up to 2TΩ insulation resistance
8. auto compensation to water polarization potential, measuring being accurate even when the resistance between the base and water collecting pipe is less than 10KΩ
9. high output power, load resistance between circuit to water collecting pipe can be as low as 100kΩ (2500V)/150kΩ(5000V),insulation resistance can be low as 1MΩ(2500V)/2MΩ(5000V)
10. simulation progress bar displaying the insulation resistance value, logarithmic scale, easy read
11. Three and a half bit LCD digital meter
12. Time display (minute/second, 32 minutes a cycle), and beep every 15 seconds,
13. auto test and record value of R15S, R60S, R10min, DAP, PI
Parameters
Measuring range | 0.1MΩ-200GΩ |
Accuracy | ±(10%+5words) |
Display | digital display plus simulation progress bar display |
Temperature measurement | -25℃~125℃ |
Test Voltage | 2.5kV, 5.0kV |
Output short circuit current | ≥ 25mA |
Measuring time | 1 min ~ 10 min ( related to testing method) |
Charging Power supply | 180~270VAC, 50Hz/60Hz±1% |
Working temperature and humidity | -10℃~ 40℃, 20~80%RH |